1 Port Active Video Balun Reciever, Camera Video Over CAT5

Products

Quick Links

FAQ's

Free Camera Lens Guide

Free Security Sign

Request Tech Support

CAT5 Voltage Loss Calculator

DVR Support

Returns and RMA

Our Customers

Rx Pharmacy Security, Pharmacy CCTV

Did you know? Most orders placed before 2:00pm EST ship the same business day.

Special Sale!

Special Sale Events

Active Vision Inc.
711-6 Koehler Avenue
Ronkonkoma, NY 11779
9am - 6pm EST M - F
(631)585-0088

Home > Baluns >

ABL-1A01-R, 1 Port Active Video Balun

Alternative Views:

List Price: $44.00
Our Price: $27.00
You save $17.00!

Product Code: ABL-1A01-R

Qty:

Description

Printer Friendly Data Sheet

Active UTP Video Balun Receiver
Active Vision’s active video balun receiver conditions balanced signal and converts it into an amplified unbalanced signal with no video distortion, which can be applied in applications such as video monitoring and video meeting. It can transmit four channels of video simultaneously on a single CAT-5 twisted pair wire. It can simplify wiring and lower expenses.

Features

Save project wiring expenses, each pair of wire can transmit one channel of video signal and one common CAT-5 unshielded twisted pair wire can simultaneously transmit four channels of video

If used with a passive transceiver the farthest transmission distance will be 3,000ft, and the farthest transmission distance can reach 8,000ft if used with an active transmitter

Up to 16 Receivers may be rack mounted using the 16P Rack Panel Kit

Built-in transient suppression protection

Technical specifications:

Frequency response: DC-8MHZ

CMRR (Common Mode Rejection Ratio): 60DB

Impedance: BNC terminal: 75Ω, Connection terminal: 100Ω

Working temperature: -10°C ~ 70°C

Storage temperature: -30°C ~ 70°C

Applicable to NTSC, PAL, SECAM and CCIR systems

External dimension: 75mm*34mm*25mm (excluding BNC)

Power supply: DC12V (Max:50mA)

Installation Instructions:
Connect the white striped wire of a pair from the CAT-5 unshielded twisted pair cable to the “+” terminal of the green socket and connect the solid color wire to the “-“ terminal. Connect the BNC interface of the video balun receiver to your monitor or recording equipment. If there is a splice in the circuit, please use a splice block or termination strip to ensure perfect contact at the splice.

Application Diagram

Type of required wire:
Only use standard unshielded CAT-5 or better twisted pair wire. The wire quality will directly affect the transmitted image and transmission distance.
Characteristic impedance: 100Ω±20Ω
DC loop resistance: 18Ω/100m
Differential capacitance: 62pf/m (Maximum)

Adjusting method:
Adjust the “BRIGHTNESS” knob to adjust the image brightness, then adjust the “SHARPNESS” switches to adjust the image sharpness and color. Adjust the switches according to the transmission distance. Use the diagram below for your reference.

Frequently Asked Questions

Why does my video look like a scrambled TV signal?
This typically indicates reversed polarity.
Can shielded twisted pair be used?
Shielded wire can be used up to a few hundred feet. However we do not recommend it. It’s high-frequency roll-off will severely degrade the transmission distance and performance.
Can Category 6 wire be used?
Yes. Unshielded Twisted Pair wire, Category 5 or better, can be used with UTP video transceivers.
Can I transmit more than one video signal in a multi-pair wire bundle?
Yes. One of the benefits of using Active Vision video transceivers is the interference rejection. UTP video signals can reside in the same wire bundle as multiple video signals, ringing telephones, Ethernet, low voltage power, RS-422, RS-485, etc.

Accessories for this product...

CAT 5E Bulk Network Ethernet Cable

Sale Price: $76.95

Add

Browse for more products in the same category as this item:

Baluns
Baluns > Active Video Baluns
Baluns > Active Video Baluns > 1 Port Active Video Baluns