The ABL-1P34-CB  offers video,  audio & power  to and from CAT-5 twisted pair cabling. It has two sets of simple connections. The first is a BNC video, RCA audio and a bare power cable. The second is a RJ-45 connector for the CAT-5 twisted pair connection. The circuitry is passive so there is no need for a power supply. The ABL-1P34-CB allows a Digital Video Recorder (DVR) to be located an extended distance from the cameras and microphones being connected to it. Doing so with conventional audio video & power cabling is both expensive and prone to signal degradation. By using this device and a run of CAT-5 the problem can be solved inexpensively and without signal loss and the introduction of noise. In addition, in today’s retrofit market an installer cannot always successfully run a wire from point A to point B. There exists however an abundance of twisted pair cabling in many homes. By using a pair of these devices with an existing wire an installer may be able to complete a job that he otherwise could not.