|
The ABL-1A02-T is designed for operation over Category 2 or better unshielded twisted pair(UTP) cable. This active video balun transmitter works over any existing communication and computer network spare pairs, or new cable installations. Advanced transmitter electronics provide complete immunity from ground loop, hum and noise to produce maximum video quality with virtually no loss. A dip switch on the unit provides precise adjustment of gain and frequency compensation, allowing the system to be “fine-tuned” for any cable. This unique feature provides easy adjustment for optimum performance over the entire operating range and also allows cable length to be estimated with a wide safety margin, when bidding CCTV twisted pair transmission jobs. Transmit CCTV Security Surveillance Camera Video upto up to 3,000ft when used with any passive transciever. Full-motion color CCTV video at distances up to 8,000ft when used with any active receiver.
Key Specifications/Special Features:
Single channel active video balun transmitter with gain control
Video:
Frequency response: DC-6MHz
Common-mode/differential-mode rejection: 15kHz to 6MHz 60dB typ.
Impedance:
BNC 75 Ohms
UTP, Push-pin Terminal: 100 Ohms
Wire Type:
One Unshielded Twisted Pair 24-16 AWG (0.5-1.31mm)
DC loop resistance: 18 Ohms/100M
Differential Capacitance: 62pF/m max
Power: 12vDC *NOT INCLUDED*
Mechanical:
Dimensions: 4.1"(W) x 2.8"(L) x 1.2"(H)
Weight: 100g // 0.22lbs
Environment:
Temperature: 0 to 50 degrees Celsius
Humidity: 0 to 95% |
